Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser that works with CAN buses. It is discrete, does not use LED indicators or key fobs, and is concealed in the wiring of the vehicle.
The user may also turn off the system temporarily by using Transport Mode when renting their car. This guide will guide you through the installation process of the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car from key hacking attacks, cloning and relay attacks. The system is directly connected to the ECU of your vehicle and protected by a pin code you select. It is undetectable by thieves using diagnostic scanners or other modern methods. It is not able to be disabled by cutting circuits.
The system is simple to use, but it's important to have an expert installation to ensure a smooth and secure connection with your vehicle's ECU. A Thatcham-approved installer can help in the installation and programming of your Ghost system. They can also suggest a tracking or alarm system to complete the protection package for your vehicle.
First, the installer needs to disconnect your battery to prevent accidental airbag deployment or short circuits. When the battery is disconnected, the installer can start working safely. Hand tools are essential to make precise connections, while a multimeter can be used to check electrical values and safety. Insulation tape and cable tie are crucial to ensure connections are secure and keep wiring neat. The user's manual gives specific guidelines that are specifically tailored to the Ghost Immobiliser model you have.
It is essential to choose an area for grounding that is free of paint or debris during installation. The installer should also make sure the immobiliser's CAN H and CAN L wires are connected to the correct ports on your vehicle's ECU. The wires can be connected or soldered based on the model. Using a quality connector is recommended to ensure a durable and reliable connection.
Once the install is complete After the installation is complete, the customer can turn on after the installation is complete, the customer can activate Transport Mode. This allows the vehicle to be used by valet parking or mechanics without having to know the pin code. The customer must press the icon for service on the dashboard five times over 2 seconds. The system will confirm this by displaying 5 indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and a highly efficient immobiliser. It's a great option for those who rent their vehicles often through platforms like Turo. An immobiliser can reduce the cost of insurance, as it lowers the chance of theft.
Getting Started
If you're looking for a solution that will safeguard your vehicle from theft, you can't go wrong with an autowatch ghost immobiliser. It will stop your car from being started even when a criminal steals or copies the key. This is due to its advanced technology, which is designed to stop the engine from starting until the correct PIN code is entered.
The device connects to the vehicle's CAN bus network and allowing it to communicate with the ECU directly. It uses existing buttons on the dashboard and steering wheel to create a unique sequence only you know and makes it impossible for someone else to start your vehicle. This is the ultimate security system to protect your most precious possessions and preserve its value when you want to sell it in the future.
Installing an immobiliser from Ghost is simple however, you must follow the steps to avoid electrical issues and malfunctions of the system. You'll need to find a 12V power source and a suitable grounding for the chassis of your car. Then, you can begin connecting the wires to the immobiliser. Make sure you use top-quality connectors and soldering methods to ensure a secure connection. Also, ensure that you cover the connections with heat shrink tubing and insulation tape to shield them from short circuits in electrical power and other problems.
Once the wires are connected, you can reconnect the battery and then turn on the engine to test the immobiliser's function. Once everything is working properly you can place it in a secure place under the dash or somewhere else in the vehicle. Make sure to cover it well to ensure that thieves cannot alter it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified, which means that it meets the highest standards of security and is an excellent protection against car thieves. It provides superior protection against key cloning, hacking and relay attacks, and it isn't able to be disabled unless you know the code. The device is easy to use, and can be set into an option for a service valet so that your vehicle won't be activated when you take it to an MOT or for servicing.
Wiring
The Ghost Immobiliser, a cutting modern security system, was designed to deter theft of vehicles. It connects directly to the car's CAN bus network and communicates with the ECU, making it virtually undetectable as an addition to your vehicle. ghost immobilisers doesn't interfere with the factory settings of your car, unlike other aftermarket systems that require the removal of circuit elements.
It's also undetectable to thieves using diagnostic scanning devices. This is because the system doesn't send and receive radio frequency signals and it relies on the CAN data to communicate with your ECU. It also doesn't require modifications to your current key fobs.
To use the Ghost Immobiliser, simply switch on the ignition of your car and then enter the sequence to disarm (either one or two buttons). The indicator will flash twice to confirm that you've entered the correct code. After this, you can start your vehicle and drive off in peace.
Once installed The Ghost Immobiliser can protect your car from hacking and key cloning and will also protect the value of your pride and joy. In Transport Mode, you can temporarily disable the Ghost Immobiliser in case you have to hand your car to service or valet park.
ghost vehicle immobiliser 'll require a continuous power source (12V) in addition to a grounding source to complete the installation of a Ghost immobiliser. Make sure both are well-insulated and able to be touched. Cable ties are also recommended to secure the wires. This reduces the risk of theft by thieves. Make sure you verify the locations of these points to avoid mistakes and mark them with an adhesive or label. It's recommended to check all connections for signs of wear and tear. Connectors that are loose could cause problems with the system, so be sure they're securely in place and properly insulated. Also, don't forget test the Ghost Immobiliser after installation is completed. This will confirm that the unit is operating properly and that all connections and insulation are safe. If there are any issues, make certain to fix them immediately.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that integrates seamlessly with your vehicle's ECU to prevent unauthorized motor starting. Its cutting-edge technology protects your vehicle from key cloning and hacking along with other methods used by thieves to steal vehicles. The Ghost works in conjunction with existing tracking and alarm systems to offer the ultimate security for your car. The Ghost's unique features, combined with its secluded design, make it a popular option for both car enthusiasts and security conscious drivers.
It is crucial to follow the steps of installation in order to ensure a complete integration of the Ghost Immobiliser. Refer to the wiring diagram for the vehicle to assist you in locating and connecting the wires. You'll then need to identify the power and grounding sources. Once you've located them, you'll be required to mark the points so that they are easy to locate when installing. In addition, it is essential to use high-quality tools and materials. Basic hand tools can aid in making precise connections. A multimeter can verify electrical values, and ensure security. Insulation tape and cable ties will help keep all connections neat and tidy. A Ghost-specific user manual is also available.
It is essential to test the system before installing it. Enter the PIN code into the system and start the vehicle. This step will confirm that the immobiliser is working as intended, preventing unauthorised vehicle starts. It's recommended to perform this procedure regularly as part of your routine inspections of your vehicle to ensure that the system is operating correctly.
After the installation is completed Once the installation is complete, you can drive your car with confidence. The Ghost will guard your pride and joy from potential car thieves. It will ensure that no one will escape with your car even if they don't have the correct PIN code. The Ghost can also be used with a Thatcham-approved tracker to detect any attempt to steal or tamper and allow you to track your vehicle if it's stolen.
The Ghost can be used on a wide range of vehicles and is compatible with the majority of major brands. Monty's Locksmith can help you secure your vehicle with this cutting edge device. Contact us today to learn more about our service and installation options. We are a TASSA registered installer, a certificate that ensures that we adhere to strict standards for installing our products. This reassures customers, insurers and law enforcement officials that installations are done safely and in a correct manner.