Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser designed for CAN buses. It is discreet It does not include LED indicators or key fobs and is hidden in the wiring of the vehicle.
The user can also disable the system temporarily by using Transport Mode when renting their vehicle. This guide will take you through the installation of the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car from key hacking attacks, cloning attacks and relay attacks. The system is directly connected to the ECU of your car and protected by a PIN code that you choose. It's undetectable to thieves using scanners for diagnostics or other modern methods, and is unable to be disabled by cutting circuits.
The system is simple to use, but it is essential to have a an expert installation to ensure a secure and secure connection to your vehicle's ECU. Installers certified by Thatcham can assist you with the installation and programming of your Ghost system. They can also recommend a tracking or alarm system to complete the protection package for your vehicle.
The first step is to disconnect the battery to prevent accidental airbag deployment or short circuits. After this is completed, the installer can safely begin work. Hand tools are the most basic to be used for precise connections. A multimeter is a great tool to verify electrical values. Insulation tape and cable ties are also vital for protecting connections and keeping wiring tidy. In addition, the user's manual offers specific instructions specifically tailored to the Ghost Immobiliser model you have.
During the installation process, it's important to choose the right grounding location that is free of debris and paint. Installers should also ensure that the immobiliser's wires CAN H & can L are connected to the proper ECU ports. Based on the model, these wires might need to be soldered or plugged into. To ensure a reliable and long-lasting connection it is recommended you choose a high-quality plug.
After the installation is completed Once the installation is completed, the customer can enable the Transport Mode. This allows mechanics or valet parking to access the vehicle without knowing the pin code. The customer has to press the icon for service on the dashboard five times within 2 seconds. The system will confirm this by displaying 5 indicators.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA verified and Thatcham approved. It's a great option for those who rent their vehicles regularly on platforms such as Turo. An immobiliser can cut down on insurance costs, since it decreases the likelihood of theft.
Getting Started
ghost immobilisers 's not difficult to come up using an autowatch immobiliser for those who want to safeguard your vehicle from theft. It will stop your car from being started when a criminal steals or copies the key. It's possible because of its advanced technology that prevents the engine from starting until the correct PIN code is entered.
The device connects to the vehicle's CAN bus network, allowing it to communicate with the ECU directly. It makes use of the buttons on your dashboard and steering to create a unique sequence, that only you can understand. This makes it impossible for anyone else to start your vehicle. This is the most secure security system that protects your car's pride and joy, keeping its value intact should you decide to sell it in the future.
Installing Ghost's immobiliser is straightforward, but you must follow the instructions to avoid electrical issues and malfunctions of the system. First, you must find a 12V power source and a solid grounding on the chassis of your car. After that, you can begin connecting the wires to the immobiliser. Make use of high-quality connectors and soldering techniques to ensure a secure connection. Also, make sure to cover the connections with heat shrink tubing and insulation tape to shield them from electrical short circuits and other problems.
Once the wires are connected, you are able to reconnect the battery and start the engine to test the immobiliser's functionality. After you've confirmed that everything is working correctly and you are satisfied, you can place the immobiliser in a secure position inside the vehicle. Be sure to conceal it well so that a thief cannot tamper with it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified, which means that it is in compliance with the highest standards of security and is a fantastic protection against car thieves. It is resistant to hacking and key cloning and cannot be disabled without a code. The device is easy to use, and it can be set up to an option for a service valet so that your vehicle won't be activated if you take it for an MOT or servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system that is designed to prevent vehicle theft. It communicates with your vehicle's ECU and connects directly to the CAN bus. Unlike other aftermarket systems that require the removal of circuit components, the Ghost Immobiliser doesn't interfere with your vehicle's factory settings.
The system is also unnoticeable by thieves using diagnostic scanning tools. This is because the system doesn't send and receive radio frequency signals and it relies on CAN data to communicate with your ECU. In addition, it doesn't need any modifications to your vehicle's existing key fobs.
Enter your disarm sequence (either two or one button) and turn on the ignition of your vehicle to use Ghost Immobiliser. The indicator will flash two times to confirm that you have entered the correct code. You can now start your vehicle and drive safely.
Once installed Once installed, the Ghost Immobiliser will secure your vehicle from key cloning and hacking and will also protect the value of your car's pride and joy. If you have to hand over your vehicle to a valet or service provider The Ghost Immobiliser can be temporarily disabled in Transport Mode.
To complete a Ghost Immobiliser installation, you'll have to find a source of constant power (12V) and an earthing point. Be sure that both are well-insulated and able to be touched. It's also recommended to use cable tie to secure and bundle the wires. This reduces the risk of being tampered with by thieves. Make sure you verify the position of these points to avoid committing a mistake and mark them with the help of tape or a label. It's also a good idea to examine all connections for signs of wear and tear. Be sure to ensure that all connections are securely in place, and are properly insulated. Also, don't forget test the Ghost Immobiliser after installation is complete. This will ensure that the unit is working correctly and that all connections and insulation are safe. Make sure to address any problems immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that connects seamlessly with your car's ECU to prevent the motor from starting without authorization. The innovative technology it uses protects your vehicle from hacking, key cloning, and other common tactics that thieves employ to steal vehicles. The Ghost is a perfect complement to existing alarm and tracking systems to provide the most effective security for your car. The Ghost's unmatched features, combined with its secluded design makes it a sought-after option for both car enthusiasts as well as security-conscious drivers.
In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, you must to follow the steps of the installation process. Consult the wiring diagram of your vehicle as it will help you locate and connect the wires. You'll need to determine the grounding and power sources. Once you've found them then you'll be required to mark them so that they're easily identifiable when installing. It is also important to use top-quality tools and materials. Basic hand tools can help in making connections that are precise and a multimeter can check electrical values and ensure safety. Insulation tape and cable tie will keep all connections neat. A Ghost-specific user manual is also available.
Before proceeding with the installation it is important to test the system by entering the PIN code, then starting the vehicle. ghost immobiliser cost will ensure that the immobiliser works as intended and will stop vehicle starts that are not authorized. This procedure should be carried out regularly as part your regular vehicle inspections in order to ensure the system is always functioning properly.
After the installation has been completed, you can start driving your car with confidence. The Ghost will keep your precious possessions safe from potential thieves, ensuring that nobody can take off with your vehicle without the proper PIN code. The Ghost can also be used with a Thatcham-approved tracker to detect any attempts to steal or tamper that could lead to the location of your vehicle in the event of it being stolen.
The Ghost can be used in a variety of vehicles and is compatible with most major brands. Monty's Locksmith can help you secure your vehicle with this innovative device. Contact us today to learn more about our service and installation options. We are a TASSA registered installer, a certificate that ensures that we adhere to strict standards for the installation of our products. This reassures customers, insurers, and law enforcement that all installations are performed safely and correctly.